Bahnsteig-Uhr aus Messing mit Stecksockel zum Anschluss an 16 Volt
Höhe: 115 mm
SMD 3 V
Die Lampe wird mit Vorwiderstand und Schutzdiode zum Anschluss an 16 - 19 Volt ausgeliefert.
Der Beli-Beco Stecksockel:
In die Bodenplatte ein 4-5mm Loch bohren, den Stecksockel einstecken und mit der Rändelmutter festschrauben, die Klinkenkupplung anschrauben, das Kabel anschließen und die Lampe einstecken. (rot = plus blau = minus)
Tipp: Wenn Sie eine 5mm Bohrung in die Bodenplatte machen, können Sie Bohrungenauigkeiten bis 10 Grad ausgleichen.
English
Station platform clock crafted in brass with connection socket; to be powered by 16 volts
Height: 115 mm
SMD 3V
The lamp is supplied with a resistor and protection diode for connection to 16 - 19 volts.
The Beli-Beco socket:
Drill a 4-5mm hole in the bottom plate, insert the socket and tighten with the knurled nut, screw on the jack coupling, connect the cable and insert the lamp. (red = plus blue = minus)
Tip: If you make a 5mm hole in the bottom plate, you can compensate for drilling inaccuracies up to 10 degrees.
The member krs
confirms that he/she hold the rights to this picture
or is authorized to publish this picture.
The operator of the GartenBahn DataBase assumes no responsibility
for this picture and does not claim any ownership.
If you wish to exercise any legal claims, please contact the member directly krs.
All the information in this Gartenbahn Database is provided voluntarily by registered members.
We are unable to verify all of this information and can therefore not
accept any liability should any of the his information be incorrect.