Registered users |
|
Search |
|
|
Random image |
|
RhB Behältertragwagen (Gravel car) Lbk 8642
Comments: 0 HLeske
|
|
|
|
|
|
RhB Mallet Tenderdampflokomotive (Tank locomotive) G 2/3+2/2 Nr.25
RhB Mallet Tenderdampflokomotive (Tank locomotive) G 2/3+2/2 Nr.25 |
Description: |
English below
RhB G 2/3+2/2 Nr.25 Mallet Tenderdampflokomotive
Wird als Bausatz geliefert.
Vorbild:
Die Tenderlokomotive Nr. 25 wurde von der Schweizerischen Lokomotiv- und Maschinenfabrik in Winterthur für die Rhätische Bahn Ende des 19. Jahrhunderts, gefertigt.
Die Bauart war Mallet - Vierzylinder im Verbund, die Steuerung Walschaert, der Rahmen war ein Aussenrahmen. Der Dampf wurde über den Dampfdom abgenommen und an die hinteren Hochdruckzylinder geführt, mit dem Abdampf wurden die vorderen Niederdruckzylinder gespeist.
Gelaufen ist sie bis zu ihrer Ausmusterung in den Jahren 1920/21 auf dem Stammnetz der RhB.
Die Elektrifizierung und der große Kohlemangel ab dem Jahr 1913 haben dieser schwarzen Schönheit ein viel zu frühes Ende gesetzt und so wurde die Nr.25 in den Jahren 1920/21 schon wieder ausgemustert und nach Madagaskar verkauft, wo sie 1951 ausrangiert und leider verschrottet wurde.
Modell:
Der vorbildgerechte Nachbau der Nr.25, im Maßstab 1:22,5 wird von uns als Bausatz in gewohnter Qualität angeboten.
Der Dampfkessel ist mit einem Flammrohr mit Rauchrohren ausgestattet und wird mit Gas beheizt. Die Lokomotive verfügt über zwei Gastanks.
Das Kesselwasser wird durch ein Speiseventil am Führerstand eingepumpt und kann auch während des Betriebs nachgespeist werden.
Der Wasserstand des Kessels ist über ein Ø 5 mm Schauglas ablesbar. Die Zylinder sind über Spindeln entwässerbar, die Kolben sind, seit Jahren bewährt, aus Teflon gefertigt. Die Dampfzufuhr Frischdampf- Abdampf wird mit einem Verbundventil geregelt.
Die Einzelteile der Lok sind bearbeitet (gerieben, Gewinde geschnitten, gelötet, geprüft), geschwärzt oder lackiert, fertig zur Montage.
Die bebilderte Bauanleitung hilft beim Zusammenbau.
Sinnvolle Ergänzungen sind: eine Fernsteuerung, die Dampfpfeife, unser RC-Gashahn sowie unser Starterset.
Technische Daten:
Länge über Puffer: 465 mm
Breite: 115 mm
Höhe: 167 mm
2 Zylinder Niederdruck 22 mm
2 Zylinder Hochdruck 14 mm
Hub: 20 mm
Flachschieber mit Voreilung
Teflonkolben
Zylinderentwässerung
Flammrohrkessel mit Gasfeuerung
Kesselinhalt: ~ 380 ml
Wasserstandsglas: Ø 5 mm
Zweiter Gastank
Wassernachspeiseventil (unter Druck)
Aussenrahmen
Steuerung Walschaert gleichläufig
Achslager gefedert
Teflongelagerte Achsen
Räder sind elektrisch isoliert
Achsfolge (1´B)B
Radius 2
Inkl. Manometer und Syphon
Für RC-Steuerung vorbereitet:
Zylinderentwässerung, Umsteuerung,
Verbund, Dampfhahn.
Jahreslokomotive 2015 - Einmalige Auflage - Vorbestellung bis Sommer 2015!
Änderungen bzw. Verbesserungen vorbehalten. Modelle zeigen evtl. Sonderausstattungen.
English
RhB G 2/3 + 2/2 No.25 Mallet tank locomotive
Available as a kit.
Prototype:
The tank locomotive number 25 was manufactured by the Swiss Locomotive and Machine Works in Winterthur for the Rhaetian Railway at the end of the 19th century.
The design was a Mallet - four-cylinder composite, the control Walschaert, the frame was a outer frame. The steam was drawn via the steam dome and guided to the rear high-pressure cylinder, the exhaust steam from those fed the front low-pressure cylinders .
This locomotive was in service on the main line of the RhB until decommissioned in 1920-21
The electrification and the great scarcity of coal starting in 1913 meant a much too early end of this black beauty and so the number 25 was retired in 1920-21 already and sold to Madagascar, where she was taken out of service in 1951 and unfortunately scrapped.
Model:
The prototypical replica of the Number 25 in the scale of 1: 22.5 is offered by us as a kit in our usual top notch quality.
The boiler is equipped with a flame tube with smoke tubes and is heated with gas. The locomotive has two gas tanks.
The boiler water is pumped through a feed valve on the cab and can be replenished during operation.
The water level of the boiler is a readable on a 5 mm diameter gauge. The cylinders are dewatered by spindles, pistons are made of teflon which has proven itself over many years.. The supply of steam - fresh steam exhaust steam is controlled by a composite valve.
The individual parts of the locomotive kit are suitably prepared (ground, cut thread, soldered, tested), blackened or painted, ready for assembly.
The illustrated included instructions aid in assembly.
Useful add-ons include a remote control, a steam whistle, our RC gas tap as well as our starterset.
Technical Specifications:
Length over buffers: 465 mm (18 5/16 inches)
Width: 115 mm (4 1/2 inches)
Height: 167 mm (6 9/16 inches)
2 low pressure cylinders 22 mm (7/8 inches)
2 high-pressure cylinder 14 mm (9/16 inches)
Stroke: 20 mm (13/16 inches)
Flat slide with advance
Teflon piston
Cylinder drainage
Fire-tube boiler with gas fire
Boiler capacity: ~ 380 ml (12.85 US fl. oz)
Water level glass: 5 mm diameter
Second gas tank
Water feed valve (under pressure)
Outer frame
Walschaert control
Sprung axle bearings
Teflon bearing axles
Weight: 4.8 kg (10.6 lbs)
Wheels are electrically insulated
Wheelarrangement (1'B) B
Radius 2
Includes Manometers and Syphon
Ready for installation of RC control
Cylinder drainage, reversing,
Composite, steam wand.
Special edition for 2015 - Preorders accepted until summer of 2015!
Subject to modifications or improvements. Model may show additional special equipment. |
|
Manufacturer: |
Regner |
Catalog Number: |
23800 |
Country of Origin: |
Deutschland - Germany |
Road Number: |
25 |
Year of Manufacture: |
2015
| Epoch: |
|
Railroad: |
RhB - Rhätische Bahn |
|
|
with Digital Decoder: |
|
Scale: |
1:22,5 |
Decoder Interface: |
|
Gauge: |
45mm |
Sound: |
|
Weight in Grams: |
4800 |
Smoke: |
|
Length in mm: |
465 |
Minimum Radius in mm: |
1560 |
Number of Motors: |
|
|
User Guide: |
|
Sound File (wav): |
|
Service Parts Diagram: |
|
Sound File (mp3): |
|
Spare Parts List: |
|
Video (mp4): |
|
Expert Instructions: |
|
Additional Documentation: |
|
Decoder Installation: |
|
Additional Information: (zip): |
|
|
Date: |
01/21/2015 |
Hits: |
6301 |
Added by: |
krs |
File size: |
232.0 KB |
|
Copyright: |
The member krs
confirms that he/she hold the rights to this picture
or is authorized to publish this picture.
The operator of the GartenBahn DataBase assumes no responsibility
for this picture and does not claim any ownership.
If you wish to exercise any legal claims, please contact the member directly krs. |
|
|
|
|