Dieser Aussichtswagen der Preßnitztalbahn wurde aus einem Newqida China-Wagenkasten gefertigt.
Nach dem zersägen des Wagenkastens wurde eine Umrandung der Kante mit Messing U-Profil 3x1,5mm angefertigt und mit Sekundenkleber fixiert. Dann wurden die Löcher für die Graupner Relingsstutzen 450.2 gebohrt und diese dann eingesteckt. Durch deren Löcher ein Messingdraht von 0,8mm Durchmesser geschoben wurde. Nach und nach standen dann die verschiedenen Lackierarbeiten an. Als Bar kommt die eines Zillertaler Fasslwagen zum Einsatz, auch die ist mehrfach Lackiert. Und zu guter Letzt kam dann die Beschriftung und Sternquell-Aufkleber von Micha Tröger an diesen Wagen, der in LGB rot lackiert ist.
English
This sightseeing car car of Preßnitztalbahn was created using a Newqida China car body.
After the car body was cut lengthwise the cut edge was trimmed using a U-shaped brass profile 3x1. 5 mm fastened with superglue. Then holes were drilled for the Graupner stanchions item 450.2 and the stantions were inserted. A brass wire of 0.8 mm diameter was threaded through the stantion holes. A number of different layers of paint were then required. For the bar, the one from the Zillertal Fasslwagen is used which is also painted several times. The car is finished in LGB red with the final lettering and the "Sternquell" decals being provided by Micha Tröger.
The member Stefan's Gartenbahn
confirms that he/she hold the rights to this picture
or is authorized to publish this picture.
The operator of the GartenBahn DataBase assumes no responsibility
for this picture and does not claim any ownership.
If you wish to exercise any legal claims, please contact the member directly Stefan's Gartenbahn.
All the information in this Gartenbahn Database is provided voluntarily by registered members.
We are unable to verify all of this information and can therefore not
accept any liability should any of the his information be incorrect.