Registrierte Benutzer |
|
Suchen |
|
|
Zufallsbild |
|
Renken's Milk and Cream Kühlwagen (Reefer) 989
Kommentare: 0 krs
|
|
|
|
|
|
7 Ampere DCC Sound-Decoder - ESU LokSound XL V4.0
7 Ampere DCC Sound-Decoder - ESU LokSound XL V4.0 |
Beschreibung: |
English below
Betriebsarten:
- NMRA/DCC mit 14, 28, 128 Fahrstufen und automatischer RailComPlus®-Erkennung.
- DCC 2-stellige & 4-stellige Adressen. Bis zu 28 Funktionen im DCC-Betrieb
- M4-Datenformat mit 128 Fahrstufen und automatischer Anmeldung an passenden Zentralen. Bis zu 16 Funktionen im M4-Betrieb
- Digital Motorola® (alt und neu), bis zu 28 Fahrstufen im Motorola®-Betrieb. Bis zu 255 Adressen im Motorola®-Betrieb. Bis zu 4 Adressen für F5 bis F15.
- Selectrix® Betrieb mit 31 Fahrstufen. Funktionserweitung auf bis zu 8 Funktionstasten eingebaut (erfordert passende Zentrale)
- Analog Gleich- und Wechselspannung (abschaltbar).
- Automatische Erkennung der Betriebsart und der DCC-Fahrstufeneinstellung
- Unterstützung der Lenz® LG100, Märklin®, Roco® Bremsstrecken. Unterstützung von Lenz ABC Bremsen und Märklin® Bremsstrecke.
- Falschfahrbit
- Intelligenter Programmiermodus mit Märklin® 6021®. Hilfsprogrammiermodi für ROCO Lokmaus 2 und ROCO Multimaus.
- Fahrtreglerteil 4,0A Dauerbelastbarkeit.
- Anschluss von Gleichstrom- und Glockenankermotoren
- Geräuschlose, motorschonende Ansteuerung mit 40 / 20 kHz Taktfrequenz
- Motorausgang gegen Überlast geschützt. Lastregelung der 5. Generation (abschaltbar). Dynamic Drive Control.
Funktionsausgänge:
- 12 verstärkte Ausgänge
- 500mA Belastbarkeit pro Ausgang
- Summenstrom aller Funktionsausgänge ca. 2000mA. Ausgänge kurzschlussfest
- 4 Servoausgänge für handelsübliche Servos. 5V Spannungsversorgung integriert.
- Steuerimpulserzeugung für externe Rauchgeneratoren (KM-1, Massoth)
Eingänge:
- 3 digitale Eingänge zum Triggern von Dampfstößen oder Auslösen von Geräuschen.
Soundteil:
- 8 (!) unabhängige Soundkanäle
- Hochleistungs-Dual-Brückenendstufe mit ca. 11 Watt Ausgangsleistung
- Geräuschdaten im Flashbaustein änderbar
- Modi für Dampfloks, Dieselhydraulische Loks, Dieselelektrische Loks, Elektroloks, Akkutriebwagen, Zweikraftloks usw.
- 32 MBit Speicherkapazität (bis zu 276 Sekunden)
- Anschlussmöglichkeit für zwei unabhängige Lautsprecher
Gesamtbelastung Decoder:
- 7A Gesamtbelastung
Pufferung:
- Integriertes ESU PowerPack
Kommunikation:
- Vollständige RailComPlus®-Integration. Vollständige M4-Integration. Susi-Schnittstelle.
Lautsprecher:
- Lautsprecherimpedanz 4 - 32 Ohm, 8 Ohm empfohlen.
Dimensionen: 51mm x 41mm x 14mm
Universaldecoder zur freien Sound Bespielung: 54500
Den Decoder gibt es schon fertig mit verschiedenen Sounds bespielt:
hier nur mal einige Beispiele
54501 - Dampf "Universal 2 Zyl. Schmalspur (Vorbild: BR99)"
54513 - Dampf "BR 80"
54531 - Diesel "V 60 / BR 260"
54539 - Diesel "VT 11.5 Lyntog"
54560 - E-Lok "E 10 / BR 110"
54564 - E-Lok "E 94 / BR 194"
54581 - Diesel "VT 11.5 TEE Gasturbine"
54584 - E-Lok "E 101"
55518 - E-Lok "Ge 4/4"
55550 - E-Lok "RhB Ge 4/4 III"
55554 - Dampf "US Mogul 2-6-0"
55555 - Diesel "VW Draisine"
Die komplette Loksound Ãœbersicht kann man bei ESU direkt aufrufen.
English
Operational modes:
- NMRA/DCC with 14, 28, 128 speed steps and automatic RailComPlus® detection.
- DCC 2-digit and 4-digit addresses. Up to 28 functions with DCC operation.
- M4 data format with 128 speed steps and automatic recognition by appropriate command stations. Up to 16 functions in M4 operation
- Digital Motorola® (old and new), up to 28 drivesteps in Motorola® mode. Up to 255 addresses in Motorola® mode. Up to 4 addresses for function keys F5 to F15.
- Selectrix® operation with 31 speed steps. Extended functions for up to 8 function keys (suitable control station required).
- Analogue DC and AC operation (can be switched off).
- Automatic recognition of the operational mode and the DCC speed step setting.
- Supports Lenz® LG100, Märklin®, Roco® braking modes. Supports Lenz ABC braking and Märklin® brake mode.
- Reverse bit
- Intelligent programming mode with Märklin® 6021®. Supports programming modes for ROCO Lokmaus 2 and ROCO Multimouse.
- Motor output: 4.0A continuous
- Connection for regular DC and coreless motors
- 40 / 20 kHz motor drive PWM signal for noiseless operation
- Motor output protected against overload. 5th generation BEMF control (can be switched off), Dynamic drive control.
Function outputs:
- 12 amplified outputs
- Load for each output : 500ma max.
- Total current for all function outputs ca. 2000mA. Outputs short circuit protected
- 4 servo outputs for typical servos. 5V integrated power supply.
- Control impulses to drive external smoke generators (KM-1, Massoth)
Inputs:
- 3 digital inputs to trigger steam chuffs or sounds.
Sound unit:
- 8 (!) individual sound channels
- High power dual amplification with about 11 Watts output power
- Sound files stored in internal flash memory, can be updated
- Modes for steam-, diesel-hydraulic- , diesel-electric- , electric locomotives, battery-powered railcars, hybrid locomotives etc.
- 32 MBit sound memory (up to 276 seconds)
- Connections for two independent loudspeakers
Maximum load:
- 7Amperes total current
Energy buffering:
- Integrated ESU PowerPack
Communication:
- Full RailComPlus® integration. Full M4 integration. Susi interface.
Loudspeakers:
- Impedance 4-32 Ohms, 8 Ohms recommended.
Dimensions:
- 51mm x 41mm x 14mm (2 x1-5/8 x 9/16 inches) |
|
Hersteller: |
ESU - Electronic Solutions Ulm |
Katalog Nummer: |
54500 |
Herstellungsland: |
|
Betriebsnummer: |
|
Produktionsjahr: |
|
Epoche: |
|
Bahnverwaltung: |
|
|
|
Mit Digital Decoder: |
|
Massstab: |
|
Decoderschnittstelle: |
|
Spurweite: |
|
Sound: |
|
Gewicht des Fahrzeug in Gramm: |
|
Dampf/Rauch: |
|
Länge des Fahrzeug in mm: |
|
Mind. Radius in mm: |
|
Anzahl der Motoren: |
|
|
Betriebsanleitung: |
|
Sounddatei: |
|
Explosionszeichnung: |
|
Sounddatei (mp3): |
|
Ersatzteilliste: |
|
Videodatei (mp4): |
|
Anleitung für Experten |
|
Weitere Dokumentationen: |
|
Decodereinbau: |
|
Weitere Informationen (zip): |
|
|
Datum: |
11.11.2012 12:35 |
Hits: |
6793 |
Hinzugefügt von: |
Stefan's Gartenbahn |
Dateigröße: |
532.1 KB |
|
IPTC Info |
Byline: |
Picasa |
Date created: |
07.11.2012 |
|
EXIF Info |
Aufnahmedatum: |
07.11.2012 18:05:59 |
|
Copyright: |
Das Mitglied Stefan's Gartenbahn
versichert, dass er das Recht an diesem Bild besitzt,
oder berechtigt ist dieses Bild zu veröffentlichen.
Der Betreiber von der GartenBahn DatenBank ist nicht
für dieses Bild verantwortlich und gibt das Bild nicht
als sein eigenes aus.
Falls Sie rechtliche Ansprüche geltend machen wollen, so
wenden Sie sich bitte direkt an das Mitglied Stefan's Gartenbahn. |
|
|
|
|